Nokia 7750 command reference

Nokia 7750 command reference. This guide also provides a reference chapter with the classic CLI commands that can be used to configure the BNG CUPS UPF. Configuration Command Reference. The name of the LSP used in the path. Introduced: 16. Synopsis: Secret key for encryption of configuration files: Context: bof configuration encryption-key encrypted-leaf: Tree: encryption-key: Description. ordered by the user 8. 8. R1 3HE 17047 AAAA TQZZA Issue: 02 1. 3. Command Hierarchies. Instances. This command creates a key to be used by AES256 and SHA256 for configuration file encryption and hashing. 7. commands of the Nokia SR OS MD-CLI to those used by Junos OS and IOS XR. If a timing reference is linked to a source port that is operationally down, the port is no longer a qualified, valid reference. Interactions: This command is used along with the route-distinguisher auto-rd command supported in VPLS The reference-bandwidth command assigns a default cost to the interface based on the interface speed. The exceed-profile traffic is marked with the same value as out-of-profile traffic. Show Commands. If the reference bandwidth is configured as 10 Gbytes (10 000 000 000), a 100 Mb/s interface has a default metric of 100. Forwarding Plane (FP System Command Reference. primary-config. Guide Title Classic CLI Commands MD-CLI Commands 7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Show, and Tools Command Reference Guide All clear, show, and tools commands All clear, show, and tools commands 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide All other commands — 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Configuration Command Reference. 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS Oct 31, 2023 · This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. For more information about monitor commands, refer to the Basic System Configuration Guide for command usage and CLI syntax. 0 R1 February 2012 Document Part Number: 93-0070-09-01 *93-0070-08-05* This command is used to configure the add-paths capability for VPN-IPv4 routes. The summary includes log settings and statistics. The subsequent statistical information listed for each interval is displayed as a delta to the previous display. The commands described in this section apply specifically to 7705 SAR-Hm series nodes. exit — Enables the user to execute the exit command. Configuration Commands • The following commands apply to the 7750 SR-c12 model. 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide Describes all MD-CLI commands (except for the clear, monitor, show, and tools commands) and their supported values and parameters. These commands show the same configuration as the info command but are not subject to command authorization and do not require configuration access. Command Hierarchies • Basic CLI Commands • Environment Commands • Monitor Commands . Monitor Commands. R5 7750 SR Gx AVPs Reference Guide R15. This command is available with the merge option of the load command. The show router “management” interface command also shows the CPM Ethernet port used by the management interface. This robust and scalable OS provides the foundation for our comprehensive portfolio of physical and virtualized routers. Additional command line options control what and how the contents are displayed. password — Enables the user to execute the If the command is specified with no command line options, a summary of the defined system logs is displayed. configure card number fp number ingress network queue-group reference instance-id number policer-overrides policer reference rate Tree: rate Description. This command enables or disables support of the Nokia YANG modules in the SR OS NETCONF server. 9. R x content and may contain some content that will be released in later maintenance loads. 20. Synopsis: Threshold that triggers link utilization optimization Context: configure lag string adaptive-load-balancing tolerance number: Tree: tolerance Description. Command Hierarchies For more information on the following FP configuration commands, refer to the 7450 ESS, 7750 SR, 7950 These commands show the same configuration about as the info command but are not subject to command authorization and do not require configuration access. logout — Enables the user to execute the logout command. The system IP address of the egress router for the LSP. MDA Commands. Min. Refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR Layer 3 Services Guide: IES and VPRN for information about log show routines for VPRN services. The reference-bandwidth command assigns a default cost to the interface based on the interface speed. This information can be displayed for the entire node or on a per router instance basis. Enter //command to run a single command in the other CLI engine. primary-image. Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. configure — sfm number — admin-state keyword — apply-groups reference — apply-groups-exclude reference — sfm-type keyword Parent topic: Configuration commands sfm command descriptions Mar 15, 2024 · This command allows the user to enter configuration commands directly in an interactive session. 2. By default, add-paths is not enabled for VPN-IPv4 routes. This command, when used with the cpm-ip, cpm-ipv6, or cpm-mac parameters, displays the entries not programmed for a specified CPM filter policy. ordered by the user The show router interface statistics command also shows the MPLS statistics that are shown in using the s how router mpls interface statistics command. On CLI Commands Cheat Sheets, on the third column, you will find Nokia commands (formerly Alcatel-Lucent commands). Configuration Command Descriptions. Use these timers for network management processes. SNMP Security Commands. The following hardware guides provide site preparation recommendations and step-by-step procedures to install the 7450 ESS, 7750 SR, and 7950 XRS chassis and components, as well as procedures for installing specific adapter cards and modules. For router interface VRRP commands, see VRRP Command Reference . Nokia vs Cisco Commands / Nokia vs Juniper Commands / Nokia vs Huawei Commands . These commands display Precision Time Protocol (PTP) configuration and state information and apply to the 7450 ESS and 7750 SR. The no form of the command reverts to the default in-profile dot1p-priority setting for policy-id 1. May 28, 2012 · exec — Enables the user to execute (exec) the contents of a text file as if they were CLI commands entered at the console. configure the BNG CUPS UPF, refer to the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI User Guide. R1 Platforms. NISH Installation and User Guide This guide describes the Nokia Network Interface Shell (NISH) system architecture, functional overview, features, and how to install and set up the NISH. config — system — sync-if This command creates a Common Language Location Identifier (CLLI) code string for the 7750 SR-Series router. Down — The path is administratively disabled. VPLS Show, Clear, Debug, and Tools Command Reference 3. Power Commands. The objects are evaluated in the specified order to determine the modifications of each route and the final action to accept or reject the route. Note: This command should only be used with authorized direction from the Nokia Technical Assistance Center (TAC). Adm State. Reference. 10. In order for metrics in excess of 63 to be configured, wide metrics must be deployed (see the wide-metrics-only command). This allows the operator to see MPLS statistics from interfaces that are not added to MPLS, such as a carrier's network interfaces. help — Enables the user to execute the help command. The following commands apply to the 7750 SR-c12 model. The export command can reference up to 15 objects, where each object is either a policy logical expression or the name of a single policy. See "Loading configuration interactively" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide for more information. This command is available on applicable platforms only. 0. mandatory. 2. 8. Nokia 7450 ESS, 7750 SR, 7950 XRS, and VSR R15. The first screen displays the current statistics related to the SAP. The command creates a route-unknown node identified by prefix/mask-length and containing event control commands. Refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR Layer 3 Services Guide: IES and VPRN for information about configuring SNMP in a VPRN service. All other applicable commands supported on the 7705 SAR-Hm series are described in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Router Configuration Guide, “Router Interface Commands”; and the 7450 ESS, 7750 SR, 7950 XRS, and VSR Interface Configuration Guide 7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Monitor, Show, and Tools Command Reference Guide Describes all clear, monitor, show, and tools commands for both classic and MD-CLI and their supported values and parameters System Command Reference. x . The primary location of the file that contains the configuration. The first screen displays the current statistics related to the specified IPv6 filter. Information about special attributes of the element, including whether the element is: a key for an element. Virtual Scheduler Commands. Description. Multiple unique (different prefix/mask-length) route-unknown event nodes can be configured within the priority-event node up to the maximum limit of 32 events. Configuration Commands • Other BGP-Related Commands. If the string contains special characters (#, $, spaces, etc. config — router [router-name] — [no] interface ip-int-name — Oct 31, 2023 · Reference. Note: This guide generically covers Release 23. Refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide, CPM Filters and Traffic Management section for more details. The route-unknown command can reference any valid IP address mask-length Reference. To. Note: This command is not supported over non-interactive interfaces (for example, NETCONF). This command applies to the 7750 SR and 7950 XRS. If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of the log. With this third column, you can compare Cisco vs Nokia commands and Juniper vs Nokia commands. Command reference: 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide developers to integrate with supported Nokia routers running the SR OS Mar 15, 2024 · All other applicable commands supported on the nodes are described in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide and the 7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Monitor, Show, and Tools CLI Command Reference Guide. See the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI Command Reference Guide for information about the admin commands in the MD-CLI. R4 1. ), the entire string must be enclosed within double quotes. This command displays statistics for a SAP associated with this service. However, it responds to MRRU negotiation request by the client. Router Interface IPv6 Commands. All specifications, procedures, and information in this document are subject to change and revision at any time without notice. Card Commands. For lists and leaf-lists, the minimum or maximum number of instances for this element. The maximum number of paths to send per VPN-IPv4 prefix is the configured send limit, which is a mandatory parameter. 6. This command provides an option to specifically enable or disable negotiation of MLPPPoX on a capture SAP level or on a group interface level. Reference to an element instance in the configuration or state datastore. Introduced: 22. The Nokia Service Router Operating System (SR OS) is built to power the most demanding, dynamic, and reliable Ethernet and IP/MPLS networks. If the primary CPM’s port is active, then it shows “A/1” under the Port field,. 1 Oct 31, 2023 · For information about the concepts and descriptions of the MD-CLI syntax and command usage, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide and the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide. A CLLI code is an 11-character standardized geographic identifier that uniquely identifies geographic locations and certain functional categories of equipment unique to the telecommunications industry. MRRU option is an indication that the session is of MLPPPoX type. The commands listed in this section apply to the 7950 XRS, 7750 SR-12e, and 7750 SR-7/12 platforms. /Max. Label. This command defines the type-1 route-distinguisher IPv4 address and community value range within which the system will select a route-distinguisher for the bgp-enabled services using auto-rd. 4. 5. This command configures the threshold value that is based on the difference between the most-loaded and least-loaded links in a LAG. Only a single command can be present in the command string. The // command can be used to switch CLI engines to access classic CLI commands that are not yet available in the MD-CLI. ordered by the user 7450 ESS, 7750 SR, and 7950 XRS Hardware Guides. configure lag string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification Tree: alarm-notification Description. Basic CLI Commands — back — clear — If all reference sources are disabled, clocking is derived from a local oscillator. If the nokia-modules are disabled then requests that reference the Nokia modules return an error, and when a NETCONF client establishes a new session the Nokia modules are not advertised in the SR OS <hello>. The information contained herein is believed to be accurate as of the date of publication. To override this default cost on a particular interface, use the metric metric command in the config>router>ospf>area>interface ip-int-name context. Use the alias command to create alternative or easier to remember/understand names for an entity or command string. The 7750 SR LAC never initiates the MRRU option in LCP negotiation process. The primary location of the directory that contains the runtime images of both CPM and XCM/IOM. 7750 SR OS Basic System Configuration Guide Software Version: 7750 SR OS 10. Commands in this context configure the metering and optional profiling rates of the policer. Basic Command Reference. MCM Commands. gRPC Command Reference. 1. Description LSP Name. config — system — sync-if-timing — abort — begin — Getting Started 6 CLEAR, SHOW, AND TOOLS COMMAND REFERENCE GUIDE RELEASE 20. Command completion and ? help are not available when using //command. ordered by the user 7750 SR OS OAM and Diagnostics Guide Page 387 Tools Command Reference Command Hierarchies • Tools Dump Commands on page 387 • Tools Perform Commands on page 390 Configuration Commands Tools Dump Commands tools —Tools Dump Commands — dump — aps aps-id [clear] — aps mc-aps-signaling [clear] — aps mc-aps-ppp [clear] — lag lag-id lag-id BGP Command Reference. Nokia 7450 ESS 7750 SR 7950 XRS VSR MD-CLI Quick Reference Guide Author: Nokia Subject: SR OS Nokia 7450 ESS 7750 SR 7950 XRS VSR MD-CLI Quick Reference Guide, MD-CLI overview, MD-CLI commands, enabling and disabling MD-CLI, navigation, operation, configuration workflow, commit confirmed, configuration management, output modifiers Keywords This command shows the management Ethernet port redundancy status. If the reference bandwidth is not configured, all interfaces have a default metric of 10. This command displays statistics for a specific SAP, identified by the port ID and encapsulation value, at the configured interval until the configured count is reached. This command specifies dot1p in-profile mappings and only applies to the 7750 SR and 7950 XRS. 1 Command Tree The SR OS CLI command tree is a hierarchical inverted tree. Jul 12, 2024 · This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. config — router [router-name] — autonomous-system as-number — Oct 31, 2023 · These commands are documented in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Monitor, Show, and Tools Command Reference Guide. Notes. The no form of the command reverts the reference-bandwidth to the default value. For more information, see PFCP service SAP and subscriber management command reference. gdyo afwjqx junrbu jcz afvdlts dfkr ehunc jkqpydi bultgj keoko